How to Fix Error code U140 & U150 on canon printers

Solution 1:

• Open the paper output tray.

• Turn on the printer and open the scanning unit. The printer cartridge carriage will move to the center. Open the inner cover securing the cartridge in place by pulling it downward.

• Press the tab on the problematic ink cartridge and lift it to remove it from the printer. You will be able to tell which ink cartridge is causing the problem because its indicator light will be off or flashing.

• Open the replacement ink cartridge and pull the orange tape in the direction of the arrow to remove the protective film. Tear the orange tape off along the dotted line.
• Place the ink cartridges into the printer and press where indicated on the cartridge until it clicks into place. Ensure that all ink cartridges have a red indicator light showing that they are properly installed.

• Close the inner cover on the cartridge carriage and the scanning unit. The printer will automatically start a print head cleaning cycle. When the cleaning cycle is complete, the printer is ready to use.

Solution 2:

• Put the little green circuit board from the old ink cartridge of the same color in the new cartridge.
• If you are facing more problems Call Us +1-855-517-2433

Error "printhead not installed" 1401 1403 1405 on Canon printers

The printhead is probably broken. 


The last thing to try:

• Remove the cartridges
• Remove the printhead
• Power off the printer and wait a minute;
• Power on.

Installe the printhead and the cartridges

If You are Facing More Problems so Please Call Us +1-855-517-2433 (Toll Free)

Download and run the Canon IJ Setup Repair Tool

If you receive the error 'Setup quit unexpectedly' while installing the printer or scanner Setup CD-ROM, download and run the Canon IJ Setup Repair Tool before attempting to re-install the software.

If the 'Setup quit unexpectedly' error is still on your computer screen, click the 'Ignore' button.

1. Using your Web browser, navigate to our Download Library.
   
   http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct
2. Select the 'category', 'type', and 'model' of your printer or scanner, and then click the Go button.
3. Choose 'Mac OS X' from the Select OS drop-down menu.
   
   Note: Instead of using the CD-ROM for installation all the necessary files needed for installation can be downloaded from our Web site, by using this method you will not encounter the above error. If you are not sure which files to download continue with step 5 below.
4. Scroll down to the Software section and select the 'Canon IJ Setup Repair Tool'.
5. After reading the license agreement, click the 'I Agree - Begin Download' button at the bottom of the page.
6. Once the download has completed, double-click the downloaded file (Canon IJ Setup Repair Tool.dmg) to decompress it.
   
   Note: Your browser may decompress the file automatically. If so, skip to the next step.

When the following icon is displayed, double-click 'Canon IJ Setup Repair Tool.'


When the following window is displayed, click OK.

When the following window is displayed, click EXIT to close the window. 

Re-insert the Setup CD-ROM and try performing the installation again.
If You Want Talk to Customer Care Call +1-855-517-2433 (Toll Free)

How to Solve error code 2,140,21 or 2140,21 on Canon printers

This error appears when the scanner is used.

• "Printer is in use or an error has occurred. Check status. Scanner driver will be closed. Code : 2,140,21"

Solution 1:

• On Windows: go to "devices"
• Click on "Printer"
• Click on "Stop printing".

Solution 2:

• Reinstate the driver of the printer.

Solution 3:

• Sometimes, replacing the cartridge could solve the problem
• If are not fix Call Canon +1-855-517-2433 (Toll Free)